Publicité
OPERATING YOUR WASHER
5.
Turn the Load Size Selector to the
setting that corresponds with the size
of your wash load and the type of
fabric being washed.
•
See pages 13 and 14 for loading
suggestions.
•
The Load Size Selector has 4 settings:
Small, Medium, Large, and Extra
Large.
•
To change the load size setting after
the washer has started to fill, turn the
Selector to the desired new setting.
6.
Select a wash-rinse temperature with
the Water Temperature Selector.
Match the water temperatures with
the type of fabric and soils being
washed. See page 15.
•
Four wash-rinse temperatures are
available: hot-cold, warm-cold,
cold-cold, warm-warm.
7.
(OPTIONAL STEP) Set the Extra Rinse
selector to On for an additional rinse
and spin at the end of the wash cycle.
•
Use the Extra Rinse option when
adding extra detergent for the Super
Wash cycle, or any other cycle.
8.
(OPTIONAL STEP) Set the Cycle
Signal selector to On if you want the
washer to alert you when the wash
cycle is complete.
•
The signal is helpful when you are
washing items that should be removed
from the washer as soon as the
cycle ends.
6
All manuals and user guides at all-guides.com
Medium
Large
Extra
Small
Large
Load Size
Warm
Cold
Cold
Cold
Hot
Warm
Cold
Warm
Wash
Rinse
Temperature
Off
On
Extra Rinse
On
Off
Cycle Signal
Publicité
