Publicité
Error codes
E 25
E 31 - E 45
E 48
E 49
E 51
E 52 - E 57
E 58 - E 59
FF
Error reasons
Fan operation error on induction hob.
Electronic board hardware error on in-
duction hob.
Sensor error on induction hob.
High temperature error on induction
hob.
A sensor error / high temperature er-
ror has occurred in auto cook mode.
Any one of the keys may have been
touched long.
A cooking pot may have come over
the control unit.
There may be food/liquid poured over
the control unit.
EN / 33
Possible solutions
Turn the induction hob off and oper-
ate again after 30 seconds. Contact
the authorized dealership if the issue
is resumed.
Turn the induction hob off and oper-
ate again after 30 seconds. Contact
the authorized dealership if the issue
is resumed.
Sensor equipment shall be rendered
compatible for the operating condi-
tions. Contact the authorized dealer-
ship if the issue is resumed.
Turn the induction hob off and wait
until it is cooled down. The error shall
be resolved when temperature of the
sensor comes down below the limits.
Contact the authorized dealership if
the issue is resumed.
Turn off the induction hob and wait
for it to cool. If the problem persists,
contact the authorized service.
When long touching on one of the
keys was stopped,
When the cooking pot over the con-
trol unit is lifted,
Error will disappear when the food/li-
quid residues are cleaned.
EN
IT
FR
Publicité
