Télécharger Imprimer la page

Beko HIXI 84700 UF Manuel D'utilisation page 29

Table de cuisson encastrable

Publicité

Wash the filters in water using li-
quid detergent and reinstall after
drying. Aluminium filters may
change colour as they are washed;
this is normal and does not require
replacing your filters.
3. Replace the oil filter after cleaning.
Removing the active carbon filter
Active carbon filters provide odour reten-
tion in the product and must be changed at
regular intervals for optimum performance.
Pay attention to the fill warning indicator
for replacement.
Ensure to replace the activated car-
bon filters in your product after
every 150 hours of operation,
provided it is operating in internal
circulation mode. After 150 hours,
the
symbol appears on the vent-
ilation display. The filter should be
changed at the latest when this
warning is seen. To reset this warn-
ing, see Settings
To see the remaining working tim-
ing range of activated carbon fil-
ters, follow the detailed explanation
in "Settings.
To remove;
1. Remove the oil filter by pulling it up-
wards.
The oil filter may collect oil or over-
flowing liquids on its bottom sur-
face. While the filter is being disas-
sembled, it should be removed
straight to prevent dripping and
spilling.
There is a magnetic sensor in the
oil filter part. Ventilation is not pos-
sible without the part in place for
fluid protection.
2. Remove the liquid collection chamber
as shown in the figure below.
There is a magnetic sensor in the li-
quid collection chamber part. Vent-
ilation is not possible without the
part in place for fluid protection.
The liquid collection chamber
needs to be cleaned periodically.
The part can be cleaned by wash-
ing in water with liquid detergent
and rinsing, or it should be washed
in the dishwasher at max 70 °C.
When liquid collection chamber
part is put into it's place, direction
of arrow on the part shows that it
should be placed according to that
direction.
3. When the liquid collection chamber is
detached, you will find two carbon filters
located within the lower chamber, one
positioned on the right side and the
other on the left.
EN / 29
EN
IT
FR

Publicité

loading