Timer screen
1
Timer indicator
2
Timer decrease key
3
Timer key
4
Timer increase key
5
Timer symbol
6
Timer activity LED of the relevant hob
Ventilation display
1
Ventilation level indicator
2
Ventilation level setting field
3
Booster key
4
Ventilation automatic mod key
Carbon filter full warning symbol
Ventilation led*
Oil filter full warning symbol*
*
It varies depending on the product model. It may
not be available on your product.
General warnings for the control panel
This appliance is controlled with a
touch control panel. Each operation
performed in the touch control
panel is confirmed with an audible
signal.
Always keep the control panel
clean and dry. A damp and dirty
surface may cause problems in op-
erating the functions.
The cooker automatically returns to
stand-by mode if no operation is
performed within 20 seconds.
The appliance will display "FF"
alert due to safety reasons if any
key (
The
lected keys are illuminated.
Turning the cooker on
1. Touch the
ð The cooker is ready to use.
Turning the cooker off
1. Touch the
ð The cooker turns off and returns to
stand-by mode.
Remaining heat indicator
There is a heat indicator for each hob zone
on the control panel. This indicator indic-
ates that the cooker is still hot when it is
turned off. Do not touch the relevant hob(s)
until the remaining heat indicator disap-
pears.
H : High temperature
h : Low temperature
In case of a power failure, the re-
maining heat indicator does not illu-
minate and warn the user against
hot hobs.
Turning the hobs on (cooking zone) and
setting the temperature level
1.
Turn the cooker on by touching the
key.
ð The "0 symbol will be displayed on
the displays of the hob zones.
EN / 18
key) is touched.
light on the activated or se-
key on the control panel.
key on the control panel.
EN
IT
FR