Publicité
4. To remove one of the carbon filters,
gently tilt it to disengage it from the
magnetic slot in the ventilation gap, then
carefully pull it out as illustrated in the
figure.
5. Remove the other carbon filter from the
slot in the same way.
6. Place the 2 new activated carbon filters
in their magnetized sockets by tilting
them in through the ventilation opening.
Make sure they are fully seated in their
magnetic slots.
7. Insert the liquid protection plastic into
its socket in the same way as when it
was removed.
8. Insert the oil filter.
Waste water tank
In case of intense liquid going to the ventil-
ation compartment of the product, these li-
quids are collected in the waste water
reservoir located under the hob. In this
case, the waste water tank should be re-
moved, the liquid should be poured out and
the tank should be cleaned and reinstalled.
It is recommended to clean the
waste water tank once a month.
To remove the waste water tank:
1. Remove the top drawer located under
the hob. You should be able to reach un-
der the hob.
2. Reach the waste water tank under the
hob.
3. Unlock and remove the waste water
tank by turning the lock knob.
4. Pour out the liquid in the chamber and
clean the chamber.
EN / 30
EN
IT
FR
Publicité
