Toto Neorest II Série Manuel D'installation page 5

1) Insert the LED strip
into the LED cover (see
illustration for the cor-
rect LED orientation).
1) Connect the LED connector to
the power adapter.
LED
Cover
To Power
Supply
Support
3) Turn the power adapter back on after the wiring is
complete, then test the connection by activating the
wall switch.
INSTALLATION PROCEDURE
Installing the Lighting Unit
2) Verify that the LED
strip is facing up.
Up
Down
LED
Strip
LED
Cover
Testing the Lavatory's Operation
Power
Adapter
WARNING
Before connect-
Wire
ing the wiring,
turn the power
adapter off to
avoid electric
shock.
3) Place the LED cover
over the bottom of the
lavatory and secure with
screws.
LED Cover
2) Plug the power adapter into a wall
outlet that is connected to a wall
switch.
Power Adapter
5
Screw
Screwdriver
Wall
Switch
Wall Outlet
To Wall Outlet
120V AC 60 HZ
GFCI Outlet
To LED
Wall
Switch
CONFIRM