Publicité
Turntable Assembly:
1. Removing from carton:
Carefully remove the main unit with the packing material intact from the box. Remove the
packing material once the unit has been removed from the shipping carton. Be sure to locate
all the accessories located in the packing material.
2. 45rpm Adapter:
Locate and remove the 45-rpm adapter from the packing material and place it in the 45
adapter cutout on the top of the main unit.
3. Turntable Platter:
Remove the turntable platter from the packing material and gently place the platter onto the
CENTER SPINDLE of the turntable base.
4. Feltmat:
Remove the black feltmat from the packaging and place it on the PLATTER.
5. Headshell:
Insert the HEADSHELL into the front end of the TONEARM ASSEMBLY. While holding
HEADSHELL firmly into the front end of the tonearm assembly, turn the HEADSHELL LOCKING
NUT counter- clockwise to firmly secure the HEADSHELL to TONEARM ASSEMBLY.
6. Counterweight:
Locate and remove the tonearm COUNTERWEIGHT from the packaging. Slide
COUNTERWEIGHT onto the rear of the TONEARM ASSEMBLY. Turn it lightly and it will screw
onto the rear shaft of the tonearm.
10
Publicité
