Publicité
BM 2610041758 09-15_BC630 9/24/15 8:06 AM Page 7
Charger Indicators, symbols and meaning (model BC1836)
If the indicator lights are "OFF", the charger is
not receiving power from power supply outlet.
If the green indicator light is "ON",
the charger is plugged in but the
battery pack is not inserted, or the
battery pack is fully charged.
If the green indicator light is
"BLINKING", the battery pack is
being
charging will automatically stop
when the battery pack is fully charged.
Plug charger cord into your standard power outlet.
With no battery pack inserted, the charger's green
indicator light will go ON. This indicates the
charger is receiving power and the charger is
ready for operation.
When you insert the battery pack into the charger.
The charger's green indicator light will begin to
"BLINK". This indicates that the battery is
receiving a fast charge (Fig. 3).
When the indicator light stops "BLINKING" (and
becomes a steady green light) fast charging is
complete. The battery pack is fully charged and
can be removed from the charger.
The battery pack may be used even though the light
may still be blinking. The light may require more time
to stop blinking depending on temperature.
The purpose of the green light is to indicate that
the battery pack is fast-charging. It does not
indicate the exact point of full charge. The light will
stop blinking in less time if the battery pack was
not completely discharged.
When you begin the charging process of the
battery pack, a steady red light could also mean
the battery pack is too hot or too cold.
Fast charging is only possible when the
temperature range of the battery pack is between
32˚F (0˚C) and 113˚F (45˚C). When needed, the
internal fan of the charger will turn on to aid the
charging process and speed.
As soon as the battery pack reaches the correct
temperature range, the battery charger will
automatically switch to fast charging.
WARNING
Battery packs
BAT610G through BAT840; WCBAT612
through WCBAT625
Voltage rating 18V and 36V
For most up to date battery compatibility, please refer to www.boschtools.com
fast-charged.
Fast-
Charging Battery Pack (model BC1836)
This charger will only charge the following batteries:
"SAVE THESE INSTRUCTIONS"
If the red indicator light is "ON",
the battery pack is too hot or cold
for fast-charging. The charger will
automatically switch to fast-charging once a
suitable temperature is reached.
If the red indicator light is
"BLINKING", the battery pack cannot
accept a charge or the contacts of
the charger or battery pack are contaminated.
Clean the contacts of the charger or battery pack
only as directed in these operating instructions or
those supplied with your tool or battery pack.
If the red indicator light is "BLINKING", the battery
pack cannot accept a charge.
• Check to make sure the battery pack is inserted
into the charger properly.
• Clean the contacts of the charger or battery pack
(e. g. by inserting and removing the battery
several times) or replace the battery pack, as
required.
When the battery pack is fully charged, unplug the
charger (unless you're charging another battery
pack) and slip the battery pack back into the tool.
FIG. 3
CHARGER
RED LIGHT
Charger (model BC1836)
Voltage rating 120 V
-7-
36 V BATTERY PACK
18 V
BATTERY
PACK
GREEN LIGHT
60 Hz
Publicité
