Publicité
16. REMOTE CONTROL (WI-FI)
This appliance is equipped with Wi-Fi
technology that allows the machine to be
remote controlled via an app.
Pairing the machine with the app
Download the Candy simply-Fi app onto
your device.
The Candy simply-Fi app is available
both for Android and for iOS tablets
and smartphones.
To discover all the details of the Wi-Fi
features, explore the app menus in
DEMO mode.
Make sure the router is turned on and
your smartphone/tablet is connected to
your home Wi Fi network.
Turn
on
BLUETOOTH
smartphone/tablet (if available).
Open the app, create a user profile and
enroll
the
appliance,
instructions appearing on the device's
display.
Turn on the dishwasher by pressing the
ON/OFF button for 3 seconds when
instructed to do so in the app.
Press "PROGRAMME SELECTION" for
3 secs the message "ENROLMENT"
will scroll on the display and the "Wi-Fi"
indicator light will be off.
Within 60 secs. keep the "DELAY START"
button pressed for 3 secs., and the
message "EASY" will appear on the
display for 5 mins, the Wi-Fi indicator
light will start to flash slowly 3 times and
then turn off for 2 seconds.
Enter the password of your home WiFi
network in the App and complete the
procedure.
Successful enrollment
The message "CONNECTED" will appear
on the display once, after which the message
"REMOTE CONTROL" will appear and
the "Wi-Fi" indicator light will be steady on.
You can now check the machine from the
App.
Unsuccessful enrollment
If enrolment fails (or does not succeed
within 5 mins.):
"TRY AGAIN" will appear on the display.
The machine will not be connected.
Repeat the enrolment procedure from the
App.
For
"Enrollment App - Quick Guide" that
comes with your machine, also accessible at
the link: go.candy-group.com/bm-dw
on
your
Reset WiFi
Repeat the enrolment procedure, removing
the product from the APP, in the event of
following
the
problems or a change in your home router
password.
ENABLING REMOTE CONTROL
Whenever you want to use the machine
with remote control:
Fill the dishwasher, add detergent, and
close the door.
Turn on the dishwasher.
Press "PROGRAMME SELECTION" for
3 secs. The message "REMOTE
CONTROL" will appear on the display.
Close the door.
You can now check the machine from the
App.
103
more
information,
refer
to
the
Publicité
