Husqvarna 576 XPG Manuel D'utilisation page 42

Technical data
Engine
Cylinder displacement, cu.in/cm
Cylinder bore, inch/mm
Stroke, inch/mm
Idle speed, rpm
Power, kW/hp @ rpm
Ignition system
Spark plug
Electrode gap, inch/mm
Fuel and lubrication system
Fuel tank capacity, US pint/litre
Oil pump capacity at 9,000 rpm, ml/min
Oil tank capacity, US pint/litre
Type of oil pump
Weight
Chainsaw without bar or chain, empty tanks, lb/kg 14,6/6,6
Chain/bar
Recommended bar lengths, inch/cm
Pitch, inch/mm
Thickness of drive links, inch/mm
Drive sprocket type/teeth
Chain speed at 133% of maximum engine power
speed, m/s.
NOTE! This spark ignition system complies with the Canadian standard ICES-002.
Recommended cutting equipment for Canada
The following cutting attachments are approved for the models Husqvarna 570, 576XP and 576XPG. The combinations
of powerhead, bar and chain meet all requirements outlined in the CSA Z62.1-15 Chainsaws and Z62.3-11 (R2016)
Chainsaw Kickback standards.
The guide bar nose radius is determined by either the maximum number of teeth in the nose sprocket or the
corresponding maximum nose radius of a solid bar.
As we are listing the maximum guide bar nose radius, you may use a guide bar with smaller nose radius than in our list.
For guide bars of the same length, all sprocket-nose guide bars of the same pitch and having the same number of
sprocket teeth may be considered to have equivalent kickback energy.
A hard nose guide bar having the same length and nose radius as a sprocket-nose guide bar may be considered to have
equivalent or less kickback energy than the sprocket-nose bar.
We recommend that you as replacement use the listed guide bars and saw chains or "Type C Low-Kickback Saw Chains"
which are available at your dealer.
42 – English
TECHNICAL DATA
570
3
4,1/68
1,93/49
1,42/36
2500-2700
3,6/4,9 @ 9600
NGK BPMR 7A/
Champion RCJ 7Y
0.02/0,5
1,48/0,7
5-22
0.78/0,37
Adjustable
16-32"/40-80
3/8" /9,52
0.050/1,3
0,058/1,5
Rim/7
28,5
576 XP 576 XPG
4,5/73,5 4,5/73,5
2,0/51 2,0/51
1,42/36 1,42/36
2500-2700 2500-2700
4,2/5,7 @ 9600 4,2/5,7 @ 9600
NGK BPMR 7A/ NGK BPMR 7A/
Champion RCJ 7Y Champion RCJ 7Y
0.02/0,5 0.02/0,5
1,48/0,7 1,48/0,7
5-22 5-22
0.78/0,37 0.78/0,37
Adjustable Adjustable
14,6/6,6 15,0/6,8
16-32"/40-80 16-32"/40-80
3/8" /9,52 3/8" /9,52
0.050/1,3 0.050/1,3
0,058/1,5 0,058/1,5
Rim/7 Rim/7
28,5 28,5