27. If you want to make coffee several times consecutively, always switch off the device for about 5 minutes
before operating again.
28. Use the appliance on a flat, dry and heat resistance surface.
29. Scalding may occur if the cover is removed during the brewing cycles. Be careful not to get burned by the
steam.
30. Make sure the jug is placed on the tray correctly during the brewing.
31. The jug is designed for use with this appliance. It must never be used on a range top.
32. Do not clean the jug with cleansers, steel wool pads, or other abrasive materials.
33. Some parts of the appliance are hot when operated; do not touch with hand. Use handles or knobs only.
PARTS DESCRIPTION
1.
Top cover
2.
Tray
3.
Power on/off switch with indicator light
4.
Reservoir with water level indication
5.
Jug (x 2)
6.
Brewing chamber
7.
Filter basket
8.
Reusable mesh filter
9.
Lid of jug
10. Anti-drip function
OPERATION
Before first-time use:
Before using this device for the first time please carefully rinse all detachable components with warm
water.
Fill the reservoir with cold water to the maximum water level indication.
Afterwards brew water twice without coffee powder.
To percolate coffee:
1. Fill the reservoir with cold water.
2. Open the top cover and fill the reservoir to the desired water level indication. The maximum capacity is 1 L
(approximately 8 cups).
3. Place the reusable mesh filter into the filter basket and place the filter basket into the brewing chamber.
Use a measuring spoon to add the amount of coffee powder appropriate to the amount of cups you want to
brew. Close the top cover.
- 3 -