Publicité
Tailgate Liner Installation:
STEP 1 (Figure #1)
Using a TORX driver (#30), remove and save the
six (6) or eight (8) tailgate panel screws
(depending on tailgate style).
screws indicated by "X" in figure 1 for all tailgate
configurations.
STEP 2 (Figure #2)
Center the tailgate liner on the truck tailgate.
Press the cover down and forward into place. Line
up the holes in the tailgate liner with the holes in
the truck tailgate.
STEP 3 (Figure #3)
Use the six (6) or eight (8) tailgate panel screws
removed in Step 1 to fasten the tailgate liner to the
tailgate with a TORX driver (#30). Do not over
tighten. DO NOT USE POWER TOOLS
December 10, 2015
www.mopar.com
Remove only the
2
Figure #1
Figure #2
Figure #3
Torque
7+/- 1 N-m
5+/- 0.516 ft lb)
590155
K6862431
Publicité
