Danby Designer DMW077BLSDD Guide D'utilisation Et Soins De Propriètaire page 11

POTATO
a) Press " POTATO " repeatedly until the
number you wish appears in the display,
"1","2","3" will display in order.
"1"SET : 1 potato (approximate 230 gram)
"2"SETS: 2 potatoes (approximate 460 gram)
"3"SETS: 3 potatoes (approximate 690 gram)
For example, press "POTATO" once , "1" appears.
b) Press " START/+30 SEC. " to cook, buzzer sounds
once.When cooking finish,buzzer sounds five times and
then turn back to waiting state.
TIME DEFROST
1) Press "TIME DEFROST"; LED will display
"dEF2".
2) Press the number buttons to input defrosting time. The
accepted time range is 00:01-99:99; if the time input is not
within this range, no "beep" will sound and the microwave
will not function until valid numbers are input.
3) The default microwave power is power level 3. If you
want to change the power level, press "POWER" once,
and the LED will display "PL3"; press the number of the
power level you desire.
4) Press "START/+30SEC." to start defrosting and the
remaining cooking time will be displayed.
FROZEN VEGETABLES
a) Press " FROZEN VEGETABLE " repeatedly
until the number you wish appears in the
display, "4.0","8.0","16.0" oz will display in
order. For example, press "FROZEN VEGETABLE" once ,
"4.0" appears.
b) Press " START/+30 SEC. " to cook, buzzer sounds
once. When cooking finish,buzzer sounds five times and
then turn back to waiting state.
BEVERAGES
a) Press " BEVERAGE " repeatedly until the
number you wish appears in the display,
"1","2","3" cup will display in order. One cup
is about 120ml. For example, press "BEVERAGE" once ,
"1" appears.
b) Press " START/+30 SEC. " to cook, buzzer sounds
once.When cooking finish,buzzer sounds five times and
then turn back to waiting state.
OPERATING INSTRUCTIONS
DINNER PLATE
a) Press " DINNER PLATE " repeatedly until
the number you wish appears in the display,
"9.0","12.0","18.0" oz will display in order. For example,
press "DINNER PLATE" once , "9.0" appears.
b) Press " START/+30 SEC. " to cook, buzzer sounds
once.When cooking finish,buzzer sounds five times and
then turn back to waiting state.
PIZZA
a) Press " PIZZA " repeatedly until the number
you wish appears in the display, "4.0 "," 8.0
"," 14.0" oz will display in order. For example, press
"PIZZA" once , "4.0" appears.
b) Press " START/+30 SEC. " to cook, buzzer sounds
once.When cooking finish,buzzer sounds five times and
then turn back to waiting state.
MEMORY CLOCK
1) Press "0/MEMORY" to choose memory 1-3 procedure.
The LED will display 1,2,3.
2) If the procedure has been set, press " START/ +30 SEC."
to use it. If not, continue to set the procedure. Only one
or two stages can be set.
3) After finishing the setting, press "START/ +30 SEC." once
to save the procedure and turn back to the waiting
states. If press " START/ +30 SEC." again,it will start
cooking. Example: to set the following procedure as the
second memory, that is memory 2. to cook the food with
80% microwave power for 3minutes and 20 seconds.
The steps are as follow:
a. In waiting states, press "0/MEMORY" twice,stop pressing
until the screen displays "2".
b. Press "TIME COOK" once,then press "3","2","0" in order.
c. Press "POWER" once,"PL10" display,then press "8" and
"PL8" displays.
d. Press "START/ +30 SEC." to save the setting. Buzzer
sounds once then turn back to waiting states. If you press
"START/+30SEC." again, the procedure will be saved as
the memory 2 and operated.
e. If the electricity is not cut off, the procedure will be saved
all the time. If it is, the procedure need to reset.
f. If you want to run the saved procedure, in waiting states,
press "0/MEMORY" twice, screen displays "2", then press
"START/+30SEC." to run.
9