Lanaform WBPM-110 Mode D'emploi page 4

EN ∙ FR ∙ NL ∙ DE
01 Day and time display
02 Systolic
03 Diastolic
04 Pulse rate
05 Irregular heartbeat symbol
06 Low battery indicator
07 The pressure in cuff is instable,
08 Blood pressure level classification indicator
09 Blood pressure level classification indicator
10
11
12 LCD
13 Cuff
03. Intended Use
Fully Automatic Electronic Sphygmomanometer is
for use by medical professionals or at home and is a
non-invasive blood pressure measurement system
intended to measure the diastolic and systolic blood
pressures and pulse rate of an adult individual by
using a non-invasive technique in which an inflat-
able cuff is wrapped around the wrist.
04. Contraindication
arrhythmia to use this Electronic Sphygmo-
manometer.
05. Package contents
01 Manual
02 Wrist blood pressure monitor
03 Battery 2×AAA
06. Product Description
Based on Oscillometric methodology and silicon in-
tegrated pressure sensor, blood pressure and pulse
rate can be measured automatically and non-inva-
sively. The LCD display will show blood pressure and
pulse rate. The most recent 2×60 measurements can
4
M-WBPM110-006.indd 4 M-WBPM110-006.indd 4
or much remnant air in cuff
MEM button
START button
It is inappropriate for people with serious
be stored in the memory with date and time stamp.
The Electronic Sphygmomanometer corresponds to
the below standards: IEC 60601-1Edition 3.1 2012-08/
EN 60601-1:2006/A1:2013 (Medical electrical equip-
ment — Part 1: General requirements for basic safety
and essential performance), IEC60601-1-2:2014/
EN60601-1-2:2015 (Medical electrical equipment
— Part 1-2: General requirements for basic safety
and essential performance - Collateral standard:
Electromagnetic compatibility - Requirements and
tests), IEC80601-2-30:2009+AMD1:2013/EN 80601
2-30:2010/A1:2015(Medical electrical equipment –
Part 2-30: Particular requirements for the basic
safety and essential performance of automated
non-invasive sphygmomanometers)EN 1060-1:
1995 + A2: 2009 (Non-invasive sphygmomanom-
eters - Part 1: General requirements), EN 1060-3:
1997 + A2: 2009 (Non-invasive sphygmomanom-
eters - Part 3: Supplementary requirements for
electro mechanical blood pressure measuring
systems);ISO81060-2:2013(Non-Invasive Sphy-
gmomanometers - Part 2: Clinical Validation Of
Automated Measurement Type).
07. Specifications
01 Product name: WBPM-110
02 Model: LA090207
03 Classification: Internally powered, Type BF
applied part, IP22, No AP or APG, Continu-
ous operation
04 Machine size: Approx. 83mm × 74mm × 26mm
(3 9/32" × 2 29/32" × 1 1/32")
05 Cuff circumference: 14cm-19.5cm
(5 1/2"-7 11/16")
06 Weight: Approx. 71g (2 1/2oz.) (exclude bat-
teries and cuff)
07 Measuring method: Oscillometric method, au-
tomatic inflation and measurement
08 Memory volume: 2×60 times with time and
date stamp
09 Powe
10 Meas
a Cu
b Sy
c Di
d Pu
11 Accur
a Pr
b Pu
12 Envir
10°C~
13 Enviro
14 Envir
trans
15 Enviro
port:
16 Enviro
17 Batte
18 All com
uring
LCD, C
These
ject to ch
08.
01 Read
guide
fore o
02 Stay s
blood
03 The c
el as y
04 Durin
your b
05 Measu
06 Pleas
betw
circul
over-i
14/10/2021 11:33:20 14/10/2021 11:33:20
N