Lanaform WBPM-110 Mode D'emploi page 10

EN ∙ FR ∙ NL ∙ DE
07 Displaying Stored Results
10
M-WBPM110-006.indd 10 M-WBPM110-006.indd 10
a In Clock Mode, press MEM
monitor will display sign of current group.
The amount of results in current user mem-
ory zone will be displayed. See picture 7-1.
Press START button to switch group,
press MEM to confirm current group. The
current bank can also be confirmed auto-
matically after 5 seconds with no operation.
b Then LCD will display the average value of all
results in the current bank. See picture 7-2. If
no result stored in the current user memory
zone, LCD will display "0" for blood pressure
and pulse rate. See picture 7-3.
c Press MEM button, the LCD will display the
average value of the last three results in the
current user memory zone. See picture 7-4. If
no result stored in the current user memory
zone, LCD will display "0" for blood pressure
and pulse rate. See picture 7-5.
d Press MEM button again, the memory num-
ber in the current user memory zone will be
displayed. See picture 7-6. If the monitor has
no result stored in the current user memory
zone, the LCD will display "0". See picture 7-7.
e Then the most recent result will be displayed
with date and time stamp. See picture 7-8. Ir-
regular heartbeat symbol (if any) and blood
pressure classification indicator will blink
at the same time. Press
peatedly to review the results measured
previously. If the monitor has no result stored
in the current user memory zone, the LCD will
display "0" for blood pressure and pulse rate.
See picture 7-9.
f When displaying the stored results, the moni-
tor will turn off automatically after 1 minutes
of no operation. You can also press the but-
ton START to turn off the monitor manually.
button, the
08 Deleting Measurements From The Memory
When any result is displaying (exclude average value
displaying), keeping on pressing button
three seconds, all results in the current bank will be
deleted. See picture 8. Press the button
the monitor will be turned off.
09 Assessing High Blood Pressure For Adults
The following guidelines for assessing high blood
pressure (without regard to age or gender) have
MEM button re-
been established by the World Health Organiza-
tion (WHO). Please note that other factors (e.g.
diabetes, obesity, smoking, etc.) need to be tak-
en into consideration. Consult with your physician
for accurate assessment, and never change your
treatment by yourself.
Classifi
pressu
Level 3: a
hypertens
Level 2: in
hypertens
Level 1: m
hypertens
Normal h
Normal
Optimum
10 Techn
The moni
on LCD wi
sure (syst
MEM for specified
should co
START , tion viola
The tech
ed range
adjusted
assigned
The techn
reset. Th
automati
14/10/2021 11:33:21 14/10/2021 11:33:21