Télécharger Imprimer la page

DeWalt DCL182 Traduction De La Notice D'instructions Originale page 17

Publicité

1. To access the pivoting carabiner
carabiner 
4
  away from the LED light housing
2. Press down the spring loaded gate
carabiner
4
and slip the hose, pipe, tube or cable in your
work space into the pivoting carabiner
3. Ensure the spring loaded gate
position and locks the pivoting carabiner
anchored hose, pipe, tube or cable inside of it.
nOtE: Ensure the pivoting carabiner
will not slide off or along the anchored hose, pipe, tube or
cable before proceeding.
4. To remove the pivoting carabiner
pipe, tube or cable, open the spring loaded gate
grasp the pivoting carabiner
pipe, tube or cable from the pivoting carabiner opening.
5. Return and secure the pivoting carabiner
the LED light housing
2
Articulating Head LED (Fig. A, D, E)
The articulating head LED
3
1. To move the articulating head LED
carabiner
4
upwards and away from the LED light housing
2. To adjust the beam of the articulating head LED
and rotate the articulating head LED
the desired position.
3. You can use the pivoting carabiner
articulating head LED
3
Multi Function Button (Fig. A)
The articulating head LED
3
medium and high.
Low battery indication. If less than 3%, the activated LED and
charge indicator LED will flash two times every 45 seconds until
out of power.
1. Press the multi function button
articulating head LED
3
2. Press the multi function button
the articulating head LED
3. Press the multi function button
the articulating head LED
4. Press the multi function button
off the LED
5
.
nOtE: If the light remains on for more than five seconds,
pressing the multi function button
turning off the light..
nOtE: With the light activated, a long press of the multi
function button
 1 
will result in turning off the light.
Magnets (Fig. A)

CAUTION: When the LED light hangs by the magnets,
do not shake the LED light or the object from which it
hangs. Do not hang the work LED light overhead or from
anything that is not secure. Personal injury or property
damage may occur.

CAUTION: Only use the magnets for hanging the LED light.
The magnets are not intended to support additional weight.
4
, rotate the pivoting
2
.
12
on the pivoting
4
.
12
returns to it locked
4
to the anchored
4
is fully secured and
4
from the anchored hose,
12
, then
4
and slide the anchored hose,
4
into place onto
.
swivels from 0°–360°.
3
first pull the pivoting
3
, swivel
3
by twisting it into
4
to prop up the
on a flat surface.
has three brightness settings, low,
 1 
once to activate the
high setting.
 1 
a second time to activate
3
medium setting.
 1 
a third time to activate
3
low setting.
 1 
a fourth time to turn the
 1 
again will result in
Do not attach or hang anything additional to the LED light or
risk of breakage may occur.
1. The DCL182 has magnets
pivoting carabiner
2. The magnets
5
are intended for catching small metal parts
such as screws and bolts or hold the light in place on solid
metal surfaces.
MAINTENANCE
Your D
WALTproduct has been designed to operate over a long
e
period of time with a minimum of maintenance. Continuous
satisfactory operation depends upon proper care and
regular cleaning.
Cleaning

WARNING: Never use solvents or other harsh chemicals
for cleaning the non-metallic parts of the lamp. These
chemicals may weaken the materials used in these parts.
Use a cloth dampened only with water and mild soap.
3
.
Never let any liquid get inside the lamp; never immerse any
part of the lamp into a liquid.
Accessories

WARNING: Since accessories, other than those offered
by D
WALT, have not been tested with this product, use
e
of such accessories with this product could be hazardous.
To reduce the risk of injury, only D
accessories should be used with this product.
There are no accessories for this product.
Protecting the Environment
Separate collection. Products marked with this symbol
comply with the European Directive 2012/19/EU
and must not be disposed of with normal household
waste; Products contain materials that can be
recovered or recycled reducing the demand for raw materials.
Please recycle electrical products according to local provisions.
Further information is available at www.2helpU.com.
5
built into the bottom of the
4
.
WALT recommended
e
EnGLIsh
15

Publicité

loading