6 • ENGLISH
> SPECIFIC SAFETY INSTRUCTIONS
• Never cover or recover the barrel.
• The barrel and other hot elements of the device can
cause burns.
• Using a hairspray can cause burns when the spray
comes in contact with the barrel.
• Never hold the device by or near the barrel when the
device is switched on. The barrel can cause burns. Avoid
all contact with your skin and eyes.
> DIRECTION FOR USE
IMPORTANT: THIS IS A HIGH TEMPERATURE PRODUCT
1. Plug the unit and turn it on. Wait to allow the unit to
reach its proper working temperature. Depending on
what your hair needs, select the appropriate temperature
using the "+" and "-" temperature control buttons. Note
that the lower temperature is for the easy styled hair.
The middle temperature is for normal hair and the high
temperature is for hard styled hair.
2. Hair should be clean and dry when using the styler. While
styling, section the hair into strands of 5 to 6 cm wide
in one row. Keep the hair strand smooth by brushing or
combing through the section (from scalp to hair ends)
while holding the ends taut with the other hand.
3. Take one strand at a time, place the hair over the barrel
and wrap around the barrel downward. Then follow up
the job by placing the hair around the barrel coming
to safety tip side and after the job is finished, keep the
end of hair in your hand for 2-3 seconds hair wrapped
around the barrel. Easy styled hair need shorter time
while fine or unbleached hair will need more time. Now
gently withdraw the barrels from the center of the curl.
Allow the burl to cool and try not to disturb curls while
proceeding in the same manner around the whole head.
Be careful the hot barrels not to touch the scalp.
4. After styling the first section, you should care not to slide
the barrels along the hair and you must move (Jump)
from one section to another section.
5. When you have finished and all the curls have cooled
thoroughly, gently brush and style your