6 • ENGLISH
> SPECIFIC SAFETY INSTRUCTIONS
• Never cover or recover the plates.
• The plates and other hot elements of the device can
cause burns.
• Using a hairspray can cause burns when the spray
comes in contact with the plates.
• Never hold the device by or near the plates when the
device is switched on. The plates can cause burns. Avoid
all contact with your skin and eyes.
> DIRECTION FOR USE
IMPORTANT: THIS IS A HIGH TEMPERATURE PRODUCT
1. Plug the unit and turn it on by holder the On/Off button
for 2-3 second. Wait to allow the unit to reach its proper
working temperature. Depending on what your hair
needs, select the appropriate temperature using the
temperature slide. Note that the lower temperature is
for the easy styled hair. The middle temperature is for
normal hair and the high temperature is for hard styled
hair.
2. The temperature of the device can be managed by
touching the decoration plate and slide from 160 °C
till 230 °C and back. Choose the desired temperature
and the temperature led will light up and flicker. When
the required temperature is reached the led light stops
blinking.
3. Press the lock button and the power indicator led shows
an orange color. When touching the decoration plate
nothing happened. The temperature will stay the same.
When the lock button is pressed again the orange light
disappears. The Temperature can be changed now.
4. Hair should be clean and dry when using the styler. While
styling, section the hair into strands of 5 to 6 cm wide
in one row. Keep the hair strand smooth by brushing or
combing through the section (from scalp to hair ends)
while holding the ends taut with the other hand.
5. Close the appliance and draw the hair straightener
slowly from the roots through to the tips of your hair.
Repeat until your hair is as straight as you want.
6. When you have finished and all the hair have cooled
thoroughly, gently brush and style your hair into the style
desired.