Publicité
Using Control Panel 2
5. Circ Pump
When the control system is turned on, the circ pump will run automatically.
6. Ozone
When the circ pump is running, ozone will turn on. When the circ pump is turned off, the ozone will
turn off automatically.
7. Heating
7.1
When the control system is turned on, heating will be on automatically.
7.2 When heating is turned on, circ pump will be started in advance. Then, heat pump will run. When
heating is turned off, heat pump turns off in advance and then circ pump.
7.3
When heating is turned on, the control system will automatically control the water temp by starting
and stopping the heat pump according to water temp and setting temp
7.4
Temp control regulation (when the system is turned on):
When water temp > set temp +
When water temp > set temp - 1°C, then heating function of the heat pump will be started.
When water temp > set temp, then heat pump stops working.
8. Errors
IMPORTANT: Error codes continued in "Troubleshooting: Topside Indicators"
11
1°C, then cooling function of the heat pump will be started.
Maintenance for Your New Chill Therapy Unit
Change Your Chill Therapy Filter
Exhaust Air and Replace Filter.
1
EXHAUST AIR
Loosen the filter exhaust valve counterclockwise, then let the air exhaust from the filter.
Filter exhaust valve.
Loosen valve counterclockwise.
EXCHANGE FILTER
2
Regularly cleaning your filter is the simplest and most effective way to maintain clear water. A dirty
filter can cause power and system issues. Here are some steps about how to exchage the filter.
Loosen the locking ring.
Remove the filter cover and the whole filter.
Remove the old filter and insert the replacement. Repeat the previous steps.
Air exhaust.
12
Publicité
