Publicité
Specifications
Power Supply
Rated: 120V, 60 Hz, 7.5A
Water Flow: 20gal/Min
68L/Min
Materials
Acrylic
Aluminum
High-density PU
Dry Weight
294 lbs
133 kg
Water Capaciy
79 gallons
300 liters
Temperature
Control
37-104°F (3-40°C)
The product is equipped with the following features as indicated in the image below:
1. Water Pump
4
2. Ozone
2
3
3. Balboa® Mini Inverter Chiller
4. Insulation Sleeves
1
5
Draining
2-way draining:
normal drain Groove and
heat pump condensate
drain outlets
Antifreeze function
With the auto freeze-proof
function, heating will initiate
when the water temperature
drops below 37°F (3°C) and
will automatically turn off
when the temperature
reaches 48°F(9°C)
Filtration
HydroPur Filter within
arm's reach for easy
configuration and
maintenance
Cover
An aesthetic Aqua-shield Lid
that optimizes space, and
gives an interior-grade look
Using Control Panel 1
Panel Function Diagram
IMPORTANT: If your control panel is different than the one picture here, proceed to page 10
Touch Pad Usage Instructions
1. Temperature setting
When the system is powered on and not in setting mode, press "
"to switch the temperature unit
or °C) . The system will automatically save the selected unit.
To set the temperature, press the"
" key until you enter the temperature setting interface. The LCD
will display the temperature unit, which will flash. Then use the "
temperature value between the setting range 37-104°F ( 3-40°C ). The system will store the
temperature value you set.
2. Clock setting
When the system is powered on, press "
" button to enter the clock setting mode. The LCD will
display either the hour or minute values, which will flash. Then, press the "
adjust the hour and minute values.
3. Working Mode
When the system is powered on and not in the setting mode, press the "
switch to the desired working mode.
The system offers three default working modes (when the system is powered on, it is in the standard
mode):
·
Standard mode (LCD displaying Model N): Heat & cool function will be valid in 24 hours. If system
time falls within the water cycle set time period, filtering water cycle function will be valid.
·
Economy mode (LCD displaying Model E): If the system time falls within the water cycle set time
period, the filtering water cycle function is valid. If it falls within the heating set time period, the
heat & cool function will be valid. If it is outside the set time period, the freezing proof function will
be started.
·
Sleeping mode (LCD displaying Model D): Freezing proof will be started and other loads will be
turned off and can not be controlled by keys.
(°F
" and "
" keys to adjust the
" and "
" buttons to
" key for 2 seconds to
6
Publicité
