Publicité
3.7 Setting the timer
You can use the timer function in 2 different ways. When the time expires, the timer light
indicates the remaining time.
3.7.1 Auto power off
1.
Turn on the product by touching the power button.
2. Make sure that the timer function has not already been set. If
the timer function is already set.
3. Touch the timer button (repeatedly) to set the desired time. After the hours shown on the
display, the product will automatically turn off.
3.7.2 Delayed start time
1.
Make sure the product is switched off.
2. Make sure that the timer function has not already been set. If is
the timer function is already set.
3. Touch the timer button (repeatedly) to set the desired time. After the hours shown on the
display, the product will turn on automatically.
Touch the timer button to turn off the timer function.
3.8 Drain hose
In general, the water is collected in the water tank. If you want continuous water drainage,
you need to follow the following steps to get the situation as shown in the image.
1.
Remove the plug from the power outlet.
2. Remove the water tank.
3. Insert the drain hose into the drain opening. Always make sure the hose runs down and is
not blocked or kinked.
4. Make sure the hose is in a container or something similar to catch the water.
English
is visible on the display,
visible on the display,
35
Publicité
