Hilti TE 70-AVR Notice D'utilisation Originale page 18

3 Description
3.1 Product overview
3.2 Intended use
The product described is an electrically powered combihammer with pneumatic hammering mechanism. It
is designed for drilling in concrete, masonry, wood and metal. The product can also be used for light- to
medium-duty chiseling on masonry and surface finishing work on concrete.
▶ The tool may be operated only when connected to a power source providing a voltage and frequency in
compliance with the information given on the type identification plate.
3.3 AVR option
The product may be optionally equipped with an Active Vibration Reduction (AVR) system, which reduces
vibration noticeably.
3.4 Service indicator
The product is equipped with a service indicator LED.
3.4.1 Service indicator status
Status
The service indicator lights red.
The service indicator blinks red.
3.5 Items supplied
Combihammer, side handle, operating instructions.
Other system products approved for use with this product can be found at your local Hilti Store or at:
www.hilti.group | USA: www.hilti.com
4 Technical data
For rated voltage, rated current, frequency and/or input power, refer to the country-specific type
identification plate.
If the device is powered by a generator or transformer, the generator or transformer's power output must be
at least twice the rated input power shown on the rating plate of the device. The operating voltage of the
transformer or generator must always be within +5 % and -15 % of the rated voltage of the device.
Product generation
Weight in accordance with EPTA procedure 01
14 English
1
Dust cap
@
Tool holder
;
Accessory tool release
=
Function selector switch
%
Control switch lockbutton
&
Control switch
(
Grip
)
Service indicator
+
Supply cord
:
Side handle
∙
Meaning
End of service interval – servicing is due.
Have the combihammer repaired by Hilti Service.
TE 70­AVR
03
8.3 kg
2063038
*2063038*