Publicité
12.2 Setting up Home Con-
nect
Requirements
¡ The Home Connect app is installed
on your mobile device.
¡ The appliance receives signals from
the WLAN home network (Wi-Fi) at
its installation location.
Open the Home Connect app and
1.
scan the following QR code.
Overview of the Home Connect settings
Here is an overview of the Home Connect settings and network settings.
Basic setting
Wi-Fi connection
Remote start
Add mobile device -
Network informa-
tion
Delete network
settings
Software update
Select
On
Off
On
Off
-
-
-
Follow the instructions in the
2.
Home Connect app.
12.3 Home Connect settings
Adapt Home Connect to your needs.
You can find the Home Connect
settings in the basic settings for your
appliance. Which settings the display
shows will depend on whether
Home Connect has been set up and
whether the appliance is connected to
your home network.
Description
Switch off the wireless module during
long absences or to save energy.
Note: In networked standby mode your
appliance requires max. 2 W.
Switch remote start on the appliance on
and off.
Note: With the Home Connect app only
switch-off is possible.
Connect the appliance to the "Home
Connect" app or additional accounts.
Display network information and
appliance information.
Note: You cannot operate your
appliance via the "Home Connect" app
without a network connection.
Note: This setting is only available with
a software update.
Home Connect en-us
25
Publicité
