Publicité
en-us Basic settings
12.4 Remote diagnostics
Customer Service can access your
appliance via Remote Diagnostics if
you ask them to do so, if your
appliance is connected to the
Home Connect server and if Remote
Diagnostics is available in the country
where you are using the appliance.
Tip: Further information and details
about the availability of Remote
Diagnostics in your country can be
found in the Service/Support section of
your local website: www.home-
connect.com.
12.5 Data Protection
Please read this information on data
protection.
The first time your appliance is
registered on a home network
connected to the Internet, your
appliance transmits the following types
of data to the Home Connect server
(initial registration):
¡ Unique appliance identification
(consisting of appliance codes as
well as the MAC address of the
installed Wi-Fi communication
module).
¡ Security certificate of the Wi-Fi
communication module (to ensure a
secure data connection).
13.2 Overview of the basic settings
Here is an overview of the basic settings.
Beverage setting
1
Depending on the appliance specifications
26
¡ The current software and hardware
¡ Status of any previous reset to
This initial registration prepares the
Home Connect functions for use and is
only required when you want to use
the Home Connect functions for the
first time.
Note: Please note that the
Home Connect functions can only be
used in conjunction with the
Home Connect app. Information on
data protection can be retrieved in the
Home Connect app.
Basic settings
13 Basic settings
You can configure the basic settings
Basic settings
for your appliance to meet your needs
and call up additional functions.
13.1 Changing the basic set-
1.
a The appliance saves the basic
2.
Brewing temperature
Milk sequence
version of your home appliance.
factory settings.
tings
Change the desired basic setting.
setting automatically.
To exit the basic settings, press
Set the brewing
temperature.
Select the sequence for
milk and coffee.
.
Publicité
