Publicité
GB
Cleaning/Maintenance/
Storage
Clean and maintain your equipment regu-
larly. This will guarantee its performance
and long durability.
Ask our service centre to carry out
any work that is not described in
these instructions. Use only origi-
nal parts.
This will prevent damage to the
equipment and any resulting per-
sonal injury.
Pull out the power plug before eve-
ry maintenance operation. There
is a risk of electrocution or of injury
from moving parts.
General cleaning instructions
•
In case of transport for utilization in
different locations, the pump must be
cleaned with clear water after every
use.
•
In case of stationary installation, the
function of the float switch (
to be checked regularly (at the latest
every three months).
•
With a water jet, remove fluff and
fibrous particles which are possibly
present in the pump casing
•
Regularly remove sludge from the pit
base (at the latest every 3 months)
and also clean the shaft walls
•
Clean precipitation from the float
switch with clear water,
•
In the case of a long period of non-
use, the pump must be thoroughly
cleaned after the last use and before
the new use, since difficulties in start-
up can arise due to precipitation and
residues.
50
All manuals and user guides at all-guides.com
7) is
Cleaning the Fan Wheel
In case of soiling or blockage of the impel-
ler, this can be cleaned via the pump out-
let (3) or by removing the floor plate (4):
1. Unscrew the bracket adapter
(
10) from the pump outlet
(
3).
2. Remove the 3 screws on the
bottom of the base (5) and take
off the base plate (4).
3. Clean the fan wheel using clean
water.
4. To re-assemble, reverse this
order.
Any measures above and beyond these,
particularly opening the equipment, are
to be carried out by an electrician. In the
case of repairs, always contact our ser-
vice centre.
Storage
•
Keep the equipment clean, dry, frost-
free and out of the reach of children.
•
Unscrew the bracket adapter (
for storage.
Waste Disposal and
Environmental Protection
Be environmentally friendly. Return the tool,
accessories and packaging to a recycling
centre when you have finished with them.
Do not dispose of electrical ap-
pliances as unsorted municipal
waste, use separate collection fa-
cilities.
Hand over the device at an utilization
location. The plastic and metal parts em-
10)
Publicité
