Publicité
All manuals and user guides at all-guides.com
exceed 35 °C. Non-observance can
lead to device damage and create a
risk for the user.
•
Do not work with damaged or incom-
plete equipment, or with equipment
that has been converted without the
approval of the manufacturer. Before
initial operation, have a specialist
check that the required electrical pro-
tection measures are in place.
•
Monitor the equipment during opera-
tion (particularly in residential spaces,
in order to detect automatic switch-
ing off or dry running of the pumps
in time. Regularly check the function
of the float switch (see chapter "ini-
tial operation"). Non-observance will
invalidate all guarantee and liability
claims.
•
Please note that the pump is not suit-
able for continuous operation (e.g.
for watercourses in garden ponds).
Check the equipment regularly for cor-
rect functioning.
•
Note that the lubricants used in the
equipment may cause damage or
contamination if they escape. Do not
use the pump in garden ponds with
fish stocks or valuable plants.
•
Do not carry or fix the equipment by
the cable or pressure line.
•
Protect the equipment from frost and
from running dry.
•
Use only original accessories and do
not carry out conversion work on the
equipment.
•
Please read the notes in the operating
instructions on the topic of "mainte-
nance and cleaning". Any measures
above and beyond these, particularly
opening the equipment, are to be car-
ried out by an electrician. In the case
of repairs, always contact our service
centre.
Electrical safety:
Caution: to avoid accidents and
injuries from electric shocks:
•
The equipment is not to be operated if
there are people in the water. There is
a risk of electric shock.
•
After erection, the mains plug must be
freely accessible when the equipment
is in operation.
•
Before operating your new pump,
have a specialist check:
- The earthing, the protective mul-
tiple earthing; the residual current
circuit breaking must be compliant
with the safety regulations of the
energy supply company and func-
tion without fault,
- The protection of the electrical plug
connections from the wet.
•
If there is a risk of flooding, fix the
plug connections in an area that is
safe from flooding.
•
Ensure that the mains voltage match-
es the specifications on the rating
plate.
•
The electrical installation shall be ac-
cording to national wiring rules.
•
Connect the appliance to a power
socket with a residual current circuit
breaker of rated residual current no
more than 30 mA; minimum fuse
6 amperes.
•
Before each use, check the equip-
ment, cable and plug for damage. De-
fective cables are not to be repaired,
but rather replaced by new ones.
Have damage on your equipment re-
paired by an authorised specialist.
•
If the power cable for this equipment
is damaged, it must be replaced by
the manufacturer, a customer ser-
GB
47
Publicité
