SilverCrest RHYTHM TUNE Instructions D'utilisation Et Consignes De Sécurité page 26

˜ Aux-In operation
1. Select Aux-In mode: Press M
repeatedly, until Aux-In is shown in the
display
2. Switch off the product and the playback
device.
3. Plug a 3.5 mm jack cable (not included)
into the 3.5 mm jack socket
4. Plug the other end of the 3.5 mm jack
cable into a suitable output socket (e.g.
headphone socket) on the playback
device.
5. Switch on the product and the playback
device.
6. Start playback. Set the playback device's
volume to the highest level.
7. Adjust the volume on the product to your
preferred level.
˜ Cleaning
m ATTENTION! Never immerse the product
in water or other liquids. Never hold the
product under running water.
Do not allow any water or other liquids
enter the product's interior.
Do not use solvent-based cleaning agents,
abrasives, harsh cleaning solutions or hard
brushes for cleaning.
1. Before cleaning: Immediately remove the
connected cable.
2. Clean the product with a slightly moistened
cloth.
3. Allow the product to dry.
˜ Storage during non-use
Store the product in its original packaging.
Store the product in a dry, secure location
away from children.
The rechargeable battery needs to be
charged regularly.
.
[ ]
4 ] [
.
[ ]
GB/IE/NI 27