SilverCrest RHYTHM TUNE Instructions D'utilisation Et Consignes De Sécurité page 24

The playback device must support
o
Bluetooth standard 5.0. Otherwise you
may not be able to use all button functions.
If you exceed the reception range,
o
Disconnected
display
restored within 15 minutes, the product
switches off.
If you enter the reception range with the
o
product switched on in Bluetooth mode, the
Bluetooth connection will be established
automatically.
You may need to approve the connection
o
on the playback device.
1. Turn on the playback device (e.g.
smartphone or computer). Turn on the
search for Bluetooth devices. Note
the instruction manual of the playback
device.
display
2. Connect your playback device with
the product via Bluetooth. Refer to the
instructions for your playback device.
Select the entry Rhythm Tune from the
device list on your playback device. Once
the connection has been established, the
display
acoustic signal sounds. When the product
is successfully paired, you can use it for
wireless playback of your favourite music.
˜ Disconnecting the product
from a Bluetooth playback
device
1. In Bluetooth mode, press and hold
SCAN
Disconnected
display
is flashing in the
. If the connection is not
[ ]
Disconnected
.
[ ]
Connected
shows
[ ]
for approx. 2 seconds.
[ 6 ]
is flashing in the
.
[ ]
is flashing in the
and an
GB/IE/NI 25