Publicité
2.4 O
perAting cOnditiOns
Temperature range during operation
Maximum relative air humidity
2.5 s
Afety instructiOns tO Be OBserVed On
cOmmissiOning
Before all work on the machine, it must
first be disconnected from the power sup-
ply.
Only a qualified person familiar with the safety regulations
may start up the machine.
Always conduct test runs without workpieces.
Check the sense of rotation before starting the machine.
The operator must make sure that the components are
integrated and operate safely in the machine.
Do not start the machine until the spindle has come to a
stop.
Use only suitable tools, and never modify tools for an ap-
plication they have not been designed for.
After transport, all electrical and mechanical connections
must be examined for damage and loosening, and any
remedial measures taken.
The machine's working area must be unobstructed and
secured against unauthorized access.
3. h
aNDlINg
3.1 t
OOls
3.1.1 i
nstAllAtiOn Of cOllet chuck
Insert the collet chuck into the clamping nut until the pull-
out knob snaps into the groove of the chuck. Screw the
clamping nut together with the collet chuck onto the drive
spindle. Insert the tool into the chuck and tighten down
the clamping nut to a maximum torque of 30Nm.
ER25 / DIN 6499.
+20to +50°C
90% at +30°C
4.1 p
65% at +50°C
The machine is greased for live and need no mainte-
nance.
4.2 r
If despite strict observance of the manufacturing and test-
ing method the machine should happen to fail, it must be
repaired by an authorized SUHNER agency.
In all orders to the manufacturer please indicate the com-
ponent serial number of the machine.
4.3 w
/o
PERaTIoN
In the event of the tool being improperly handled, used
for purposes for which it is not intended and/or of the ser-
vice and maintenance instructions not being observed by
non-authorized persons, no warranty shall be in effect for
damages/consequential damages. Complaints can only
be honored if the machine is returned in the undisassem-
bled condition.
4.4 s
Temperature range: -15°C to +50°C
Max. relative air humidity: 90% at +30°C, 65% at +50°C
4.5 d
This machine consists of materials which can be dis-
posed of in a recycling process.
Before disposal, render the machine unusable.
must be recycled in an environmentally-friendly manner.
4. S
/m
ERvIcE
reVentiVe mAintenAnce
epAir
ArrAnty
tOrAge
/ e
ispOsAl
nVirOnmentAl cOmpAtiBility
Do not throw the machine into the garbage collec-
tion.
According to national regulations this machine
aINTENaNcE
13
Publicité
