Publicité
ATTENTION!
♦
If the red control LED
pack
has overheated and cannot be charged.
♦
If the red and green control LEDs
that the battery pack
♦
Push the battery pack
♦
Switch off the charger for at least 15 minutes between successive
charging sessions. Also disconnect the power plug from the mains
power socket.
Checking the battery charge level
♦
Press the battery charge level button
battery (see also main diagram). The status/remaining charge
will be shown on the battery display LED
RED/ORANGE/GREEN = maximum charge
RED/ORANGE = medium charge
RED = low charge – charge the battery
Cleaning
CAUTION!
►
Always unplug the charger before cleaning it.
►
Do not clean the charger with water.
■
Clean the appliance with a dry cloth or brush. Do not use water
or metallic objects.
Maintenance and storage
■
If you do not intend to use the appliance for an extended period,
remove the batteries and store it in a clean, dry place away from
direct sunlight.
│
GB │ IE
■
8
flashes, this means that the battery
is defective.
into the appliance.
to check the status of the
both flash, this means
as follows:
PLG 20 C3
Publicité
