Publicité
Les langues disponibles
Les langues disponibles
EKKO ART
FIXING THE OPERATOR TO THE PILLAR (D)
In order to carry out a proper installation of the operator, it is necessary to comply with the geometry measurement shown in the tables in Pic. 6 and 8.
X
D
ASSEMBLING DRIVE ARM WITH THE ANTI-
THEFT LOCKING DEVICE (E)
Assemble the arms as shown in Pic. 5.
Caution: Once the screws V and W have been thoroughly
tightened (Pic. 5) unscrew them for half a turn, in order to
guarantee a free movement of the arm.
After assembling the arm, unlock the motor and fix the arm
to the motor with the supplied screw and M10 washer.
With the gate in closing position and the motor at rest, the
anti-theft lock (E) keeps the gate leaves securely closed
and prevents anybody from forcing the gate leaves open.
FIXING THE DRIVE ARM WITH THE ANTI-THEFT LOCKING DEVICE (E)
Unlock the operator.
Caution: start the operation with the gate in closing position. Straighten the levers until the anti-theft lock (E Pic. 5) is engaged and stressed. Move the
levers back a little bit just enough to avoid keeping the anti-theft locking in working position (stressed) every time the gate will close.
°
A max
X
90
140
60
90
200
70
90
205
80
90
225
90
90
-
110
95
0
70
100
0
90
105
0
110
110
0
155
EN
13
T sec
B
I
20
130
300
19
140
270
18
150
230
16
160
135
15
180
0
18
140
284
19
160
302
19
180
315
19
225
322
E
B
X
A
α
I
V
W
4
5
6
15
Publicité
