Publicité
Les langues disponibles
Les langues disponibles
MAINTENANCE
To keep your vacuum's suction power optimal, follow these instructions. Make sure unit is off and cord unplugged.
EMPTY THE DUST CUP
1
Turn off the vacuum. Hold dust cup over trash bin and
press the empty button on the front of the dust cup. The
bottom lid will open, allowing the debris to fall out.
NOTE: Clean the dust screen inside the dust cup as
required.
TO CHECK FOR BLOCKAGES
1
Turn off and unplug vacuum.
Empty
2
Once dust cup is empty, close the bottom lid until you
hear it click.
NOTE: Empty debris from the dust cup once it has
reached the MAX fill line.
2
Check all dust cup intake openings.
Post-Motor Filter
1. 8 0 0 . 7 9 8 . 7 3 9 8
Pre-Motor Filters
Foam
Felt
CLEAN THE FILTERS
3
Access the filters by lifting the latch on the top of the
vacuum.
4
Remove and rinse the pre-motor foam and felt filters
every month. Hand wash only. Let air dry completely
before replacing. Tap loose dirt off filters between
washes as needed. Insert the felt filter first and then
place the foam filter on top of it.
5
Remove the post motor filter and rinse once a year.
Hand wash only. Let air dry completely before replacing.
3
Check both sides of the flexible hose attachment for
blockages.
7
Publicité
