Siemens SIMATIC ET200 Information Produit

SIMATIC
ET200
Product Information for ET 200AL F-IO Firmware Update
V1.0.1
Product Information
Siemens provides products and solutions with industrial security functions that support the secure operation of plants,
systems, machines and networks.
In order to protect plants, systems, machines and networks against cyber threats, it is necessary to implement – and
continuously maintain – a holistic, state-of-the-art industrial security concept. Siemens' products and solutions constitute one
element of such a concept.
Customers are responsible for preventing unauthorized access to their plants, systems, machines and networks. Such
systems, machines and components should only be connected to an enterprise network or the internet if and to the extent
such a connection is necessary and only when appropriate security measures (e.g. firewalls and/or network segmentation)
are in place.
For additional information on industrial security measures that may be implemented, please visit
(https://www.siemens.com/industrialsecurity).
Siemens' products and solutions undergo continuous development to make them more secure. Siemens strongly
recommends that product updates are applied as soon as they are available and that the latest product versions are used. Use
of product versions that are no longer supported, and failure to apply the latest updates may increase customers' exposure to
cyber threats.
To stay informed about product updates, subscribe to the Siemens Industrial Security RSS Feed visit
(https://www.siemens.com/cert).
Description
Description
The firmware update V1.0.1 for the ET 200AL F-IO module is now available.
The firmware update includes the following features:
• Corrections for problems with the delivery of diagnostic messages. In some situations, diagnostic messages for resolved
fault conditions were not successfully delivered by the module.
Refer to the ET 200AL System Manual (https://support.industry.siemens.com/cs/us/en/view/95242965) for more information
about the ET 200AL product family. Refer to the the description on the Internet
(https://support.industry.siemens.com/cs/us/en/view/109475743) of how to perform a firmware update for the SIMATIC ET
200AL.
Note
You cannot accomplish firmware update V1.0.1 by means of a SIMATIC Memory Card installed in a CPU. Please use
one of the following approaches:
• Online via PROFINET (with STEP 7)
• Via the integrated web server of an F-CPU
• Via the SIMATIC Automation Tool
Table: Models affected by ET 200AL F-IO firmware update V1.0.1
ET 200AL model
ET 200AL F-IO
© Siemens AG 2022. All rights reserved
A5E51777384-AB, V1.0, 02/2022
Description
ET200AL F-DI 4+F-DQ 2x24VDC/2A,
4xM12
Article number
6ES7146-5FF00-0BA0
1