Publicité
Les langues disponibles
Les langues disponibles
Charging using the charging station
Connect the mains adapter to the mains adapter connection on the charging
station. Place the robot vacuum cleaner onto the charging station so that the
charging contacts lie on top of each other.
Insert the mains plug into the mains socket.
The appliance is being charged. All LEDs on the operating light flash.
When the battery pack is fully charged, the LEDs light up continuously.
.. Inserting batteries in the remote control
Push the battery compartment cover on the back of the remote control down-
wards.
Insert two 1.5 V batteries of type AAA and observe the polarity shown in the bat-
tery compartment.
Replace the battery compartment cover on the battery compartment and close
it.
. Vacuum cleaning mode
You will find detailed information on operation, the various cleaning
modes and the time selection in the user manual.
NOTICE!
Risk of damage to property!
Loose cables and other objects can get caught in your
robot vacuum cleaner during operation and be pulled
along by it, causing damage.
Lay cables out of the reach of the appliance.
Make sure that all loose objects on the floor such as
curtains, clothing, paper, loose cables and extension
cables have been removed.
Remove the brushes before vacuuming on carpet. This robot vacuum
cleaner is not suitable for use on deep-pile carpets.
DE
FR
NL
ES
IT
EN
115
Publicité
