Troy Lee Designs Flowline FL Manuel Du Propriétaire page 9

THE HELMET IS DESIGNED TO BE RETAINED BY A STRAP UNDER THE LOWER JAW. FOR MAXIMUM PROTECTION THE
HELMET MUST BE FITTED AND ATTACHED PROPERLY TO THE WEARER'S HEAD IN ACCORDANCE WITH THE USERS
MANUAL. THIS HELMET CAN ONLY PROTECT IF IT FITS WELL. TRY DIFFERENT SIZES AND CHOOSE THE SIZE WHICH FEELS
MOST SECURE AND COMFORTABLE ON THE HEAD. SECURELY FASTEN RETENTION SYSTEM. GRASP THE HELMET AND TRY
TO ROTATE IT TO THE FRONT AND REAR. A CORRECTLY FITTED HELMET SHOULD BE COMFORTABLE AND SHOULD NOT
MOVE FORWARD TO OBSCURE VISION OR REARWARD TO EXPOSE THE FOREHEAD. NEVER WEAR YOUR HELMET WITH
THE BUCKLE UNFASTENED.
HELMET ADJUSTMENT CAN CHANGE DURING RIDING OR STORAGE. CHECK THE HELMET FOR PROPER ADJUSTMENT
AND FIT PRIOR TO EACH AND EVERY BICYCLE RIDE.
DO NOT WEAR ANYTHING (SCARF, BANDANA, WINTER CAP, HAIR CLIP, ETC.) UNDER YOUR HELMET AS ANYTHING UNDER
THE HELMET, INCLUDING LONG HAIR WORN UP, MAY INCREASE THE LIKELIHOOD OF YOUR HELMET COMING OFF
DURING AN ACCIDENT OR MAY OTHERWISE INCREASE THE LIKELIHOOD OF BRAIN OR OTHER INJURY AND OR MAY
OTHERWISE REDUCE THE EFFECTIVENESS OF THE HELMET.
THE HELMET IS DESIGNED TO ABSORB SHOCK BY PARTIAL DESTRUCTION OF THE SHELL AND LINER (SEE DIAGRAM ON
PREVIOUS PAGE). THIS DAMAGE MAY NOT BE VISIBLE. THEREFORE, IF SUBJECTED TO A SEVERE BLOW, THE HELMET
SHOULD BE DESTROYED AND REPLACED EVEN IF IT APPEARS UNDAMAGED, OR RETURN IT TO WWW.TROYLEEDESIGNS.
COM. IF HELMET SHOWS SIGNS OF DAMAGE, DESTROY AND REPLACE
IT. INSPECT YOUR HELMET FOR WEAR OR DAMAGE (SUCH AS CRACKS
IN THE EPS AS SEEN FROM INSIDE THE HELMET OR DENTS ON THE
SURFACE) PRIOR TO EVERY RIDE. NEVER USE A DAMAGED HELMET.
EN
EPS EPS EPS