Publicité
Les langues disponibles
Les langues disponibles
EN
AS/NZS 2063:2008
(A) NO HELMET CAN PROTECT THE WEARER AGAINST ALL POSSIBLE IMPACTS.
(B) THE HELMET IS DESIGNED TO BE RETAINED BY A STRAP UNDER THE LOWER JAW.
(C) TO BE EFFECTIVE, A HELMET MUST FIT AND BE WORN CORRECTLY. TO CHECK FOR CORRECT FIT, PLACE HELMET ON
HEAD AND MAKE ANY ADJUSTMENTS INDICATED. SECURELY FASTEN RETENTION SYSTEM. GRASP THE HELMET AND
TRY TO ROTATE IT TO THE FRONT AND REAR. A CORRECTLY FITTED HELMET SHOULD BE COMFORTABLE AND SHOULD
NOT MOVE FORWARD TO OBSCURE VISION OR REARWARD TO EXPOSE THE FOREHEAD.
(D) FOR HELMETS DESIGNED TO BE FITTED WITH AN OPTIONAL ATTACHEMENT, A STATEMENT OF THE TYPES OF
ATTACHEMENT.
(E) FOR HELMETS NOT DESIGNED TO BE FITTED WITH AN ATTACHEMNT, NO ATTACHEMNT SHOULD BE SECURED TO THE
HELMET.
(F) THE HELMET IS DESIGNED TO ABSORB SHOCK BY PARTIAL DESTRUCTION OF THE SHELL AND LINER. THIS DAMAGE
MAY NOT BE VISIBLE. THEREFORE, IF SUBJECTED TO A SEVERE BLOW, THE HELMET SHOULD BE DESTROYED AND
REPLACED EVEN IF IT APPEARS UNDAMAGED.
(G) THE HELMET MAY BE DAMAGED AND RENDERED INEFFECTIVE BY PETROLEUM AND PETROLEUM PRODUCTS,
CLEANING AGENTS, PAINTS, ADHESIVES AND THE LIKE, WITHOUT THE DAMAGE BEING VISIBLE TO THE USER.
(H) A HELMET HAS A LIMITED LIFESPAN IN USE AND SHOULD BE REPLACED WHEN IT SHOWS OBVIOUS SIGNS OF
WEAR.
(I) THIS HELMET SHOULD NOT BE USED BY CHILDREN WHILE CLIMBING OR DOING OTHER ACTIVITIES WHERE THERE IS
A RISK OF HANGING OR STRANGULATION IF THE CHILD GETS TRAPPED WHILE WEARING THE HELMET.
(J) THIS HELMET IS DESIGNED TO PROTECT IMPACT CAUSED BY COLLISION OF HEAD WITH AN OBSTACLE WHILE
CYCLING, IT HAS PASSED EN1078:2012+A1:2012 TO SHOW CONFORMITY TO THE EHSR OF REGULATION (EU)
2016/425. ALSO COMPLIES WITH THE SAFETY STANDARDS FOR BICYCLE HELMETS FOR CPSC 16 CFR 1203 AND
NTA8776.
AUSTRALIAN DISTRIBUTION BY: LUSTY INDUSTRIES: 26 RAILWAY STREET WICKHAM NSW WICKHAM 2293
AUSTRALIA
NEW ZEALAND DISTRIBUTION BY: DISTRIBUTION 101 LIMITED: 10 WHITE STREET ROTORUA NEW ZEALAND
Publicité
