Publicité
Les langues disponibles
Les langues disponibles
TF card
Once the speaker is switched on, insert the TF card into the corresponding port. The device
reads the audio files on the card and plays them back automatically. The Bluetooth mode will
be disconnected.
Pairing two speakers (TWS mode)
Two BT speakers need to be turned on simultaneously in Bluetooth mode.
Press the light button two seconds to activate the TWS function.
The two speakers will initiate the TWS connection. When the connection is completed, both
speakers will play the music at the same time.
Press the light button two seconds to shut down the TWS function.
Warning about batteries
This product contains one or more batteries.
•
Use batteries correctly to prevent any injury or fire caused by a leak, overheating,
explosion, erosion or other damage.
•
Keep new and used batteries out of the reach of children or any vulnerable person. Stop
using the device if the battery compartment does not close properly.
•
If the liquid from an alkaline battery comes into contact with skin or eyes, rinse immediately
with fresh water and consult a physician.
•
If an alkaline battery leaks, clean the liquid with a cloth and replace the battery with a
new one.
•
Do not swallow the battery/ies. If swallowed, a battery can cause severe internal burns
in 2 hours and can cause death. If batteries are swallowed, contact a poison centre
immediately and consult a physician.
•
Use AA Ni-MH, alkaline or lithium batteries.
•
Do not charge these batteries. Charging non-rechargeable batteries generates gas or
heat emissions that can cause explosions or fires.
•
Do not use different types of batteries or a mixture of new and old batteries.
•
Insert the batteries according to the correct polarity (+ and -).
•
Do not allow the same battery poles to be in contact.
•
Remove spent batteries quickly. There is a risk of the battery exploding if it is not replaced
or if the device is unused for a long period of time.
•
Replace the battery with an identical or equivalent model.
•
The batteries (or battery pack) must not be exposed to excessive heat, such as sunlight,
fire, etc.
•
Do not heat batteries or dispose of them in a fire or in water.
•
Do not use metal pliers or metal objects such as the point of a pen or tweezers to remove
batteries. Avoid deforming, crushing or piercing batteries.
•
Do not disassemble the batteries.
•
Cover the ends of the batteries with tape to prevent explosions and combustion when
these are scrapped.
•
Scrap batteries in an environmentally friendly way.
•
Do not dispose of batteries in ordinary household waste.
•
Be sure to comply with the local recycling regulations when scrapping batteries.
- EN 17 -
Publicité
