Problem
Possible cause
This is normal for a
Burning or oily
new oven and will
odor coming from
disappear within
the vent.
1/2 hour of the first
Bake cycle.
This is temporary.
Strong odor.
Oven racks are
-
difficult to slide.
Fan noise.
This is normal.
Convection fan is
-
not working.
NX9900R_CHEF_NX36R9966PS_AA_DG68-01105A-01_EN+MES+CFR.indb 47
Solution
To speed the process, set a self-cleaning
cycle for 3 hours. (See page 30.)
The insulation around the inside of the
oven emits an odor the first few times the
oven is used.
Apply a small amount of vegetable oil to
a paper towel and wipe edges of the oven
racks with the paper towel. Racks become
dull and hard to slide if they are left in the
oven during a self-clean cycle.
The convection fan runs until the function
is over or the door is opened.
The fan starts automatically when the
oven reaches the preheat temperature.
Others
Problem
Possible cause
The appliance has been
installed improperly.
The leveling leg(s) is (are)
damaged or uneven.
The product is not
level.
The kitchen cabinets are
not properly aligned and
make the range appear to
be not level.
Wrong cooking mode is
selected.
The oven racks have not
been positioned properly
for the food being cooked.
Food does not bake
The cookware has not
or roast properly in
been positioned correctly
the oven.
on the rack.
Oven thermostat needs
adjustment.
There is aluminum foil on
racks and/or oven bottom.
Oven controls not set
properly.
Food does not broil
Oven door was not closed
properly in the
during broiling.
oven.
The rack has not been
properly positioned.
Solution
Make sure the floor is level, strong,
and stable. If the floor sags or slopes,
contact a carpenter.
Check and level the range. (See the
Installation instructions.)
Ensure that cabinets are square
and provide sufficient room for
installation.
See page 22.
See page 24.
See page 25.
See page 36.
Remove the foil.
See page 26.
See page 22.
See broiling guide on page 26.
English 47
2019-03-08
12:33:17