Bimar FS-18R Notice D'instructions page 17


Make sure that the power cable is correctly positioned and does not come into
contact with hot parts or sharp edges, or become wound around the device
itself and is not twisted.
FUNCTIONING
The appliance functions are operated by the remote control which must be pointed
at the front (max distance of about 4 m) in the direction of the display; on first use
you have to remove the plastic tab from the battery seat (n. 1 battery type
CR2025).
To replace the battery "CR2025" of the remote
control, move the tab towards the centre (use a small
screwdriver) and at the same time slide the battery
tray,
- To operate the appliance, insert the plug into the wall socket side: press the side
switch in pos. I, bright led lights up on the display (standby status); to activate the
device press "
the desired functions:
button "P1" of the remote control: select to enable Eco power (600W),
-
"P1" appears on the display
button "P2" of the remote control: select to enable Confort power
-
(1200W), "P2" appears on the display
button "P3" of the remote control: select to enable Rapid power (1800W),
-
"P3" appears on the display
"Timer" button: each press increases operation by 1 hour (max 24h), and at the
-
end the device shuts off. The selected time appears on the display for a few
moments and then the selected power level appears (P1 or P2 or P3). To
disable the timer press the button repeatedly until "00" appears.
All manuals and user guides at all-guides.com
" on the remote control, "P0" shows on the display and select
17