Bimar FS-18R Notice D'instructions page 16

All manuals and user guides at all-guides.com
Step2: fix the two brackets "4" to the wall at a minimum distance of 60 cm
from each other; make 4 holes on the wall (2 per bracket), as per scheme
below, insert the metal expansion plugs "3" provided (M8* 60), fasten the
plate to the wall "4" using washers and nut (M8).
Step3: fix the two brackets and
secure them using the two screws
with nut (M4) provided for each
support, see image on the right
Step4:
Place the heater on the brackets (brackets and plate, previously fixed) and
through the guide on the back, left side (opposite side of the output cord)
slide them so that the distance from the left and right side match, lock them
with the locking screw "5".
16