Publicité
Les langues disponibles
Les langues disponibles
GENERAL DEVICE FUNCTIONS
On the playing screen, rotate the volume knob
or press » +« / »
adjust the volume. Switch off the sound by press-
ing »
« on the remote control.
/
MODE« on the device or on the
Press »
remote control to select modes.
Press »MENU/INFO« to open the menu. Press
again to close the menu and return to playing
screen.
On the menu, rotate the knob or press arrow keys
on the remote control to move along the entries.
Press »OK/SCAN« to confirm; press
BACK« or » « on the remote control to step
back.
Press and hold »
/
press » « on the remote control to switch to
standby mode. The time, date and any active
alarm times display on the screen.
Press »
« to wake up from standby.
Presets
Number of presets: lnternet Radio: 20 l Podcasts:
20 l Spotify: 10 l DAB+: 40 l FM: 40
To store any preset, press and hold
BTPAIR« or » « until the display shows the
Save preset screen. Select one of the presets 1 -
40 by rotating the navigation knob on the device
or arrow keys on the remote control and then
press OK to save the currently playing station. To
« on the remote control to
»ALARM/
MODE« on the device or
»PRESET/
----------------------------------------------------------
store 1-10 preset stations, directly press and hold
the numbers
»1...10/0
To play any preset from 1 - 40, press
BTPAIR« or » « , then select one of the listed
preset stations. When a preset station is playing,
it shows n ( 1, 2 etc) at the bottom of the screen.
To recall 1-10 preset stations, directly press the
number keys on the remote control.
Now playing information
While stream/DAB/FM is playing, the screen
shows some information about the station, press
»MENU/INFO« or »INFO« to view.
lnputting Character
As each character is selected, the key is built up
near the top of the display.
There are three options accessible by tuning the
navigate reel back before the first characters
»BACKSPACE«, »OK« and »CANCEL«.
Press »INFO« to move to the »BACKSPACE«
box as a short cut.
When the device is overloaded
The device may process large amount of data
after a period of operation, no matter in which
mode, it will cause the system freeze or malfunc-
tion. Reboot the device if necessary.
First-time Setup
When powering the device on for the first time,
it asks to setup the OSD language. Choose your
language and confirm. It displays information
of privacy policy then. Press »OK/SCAN« to
continue. The Wizard installation assistant then
appears, which guides you through the installa-
tion step by step. Select »YES« and confirm your
selection and launch the setup wizard.
« on the remote control.
»PRESET/
ENGLISH
27
Publicité
