Leckey Leeway Pelvic Cradle Mode D'emploi page 4

How to
attach
Congratulations on purchasing your Leeway.
Your harness will arrive with a Velcro seat
base strap and 4 triglide brackets (additional
attachment kits are available). Please
remove the harness and attachments from
the packaging and ensure you have all the
parts you have ordered. The following fitting
instructions are only a guideline as seating
systems vary according to manufacturer.
Seat base
strap
7
7.1 Attaching the
seat base strap
First of all wrap the seat base strap around
the cushion with the structural section of
the strap positioned on the underside. Then
replace the cushion.
7.2 Attach the side and
rear mounting straps
The two side mounting straps (a) should
be positioned approximately vertically and
attached to the wheelchair frame using
suitable fasteners.
The two rear mounting straps (b) should be
positioned approximately diagonally to ensure
Leeway is positioned correctly. The straps
should be attached to an appropriate part on
the wheelchair frame using suitable fasteners.
B
A