Pioneer GM-X564 Mode D'emploi page 7

Connection Diagram
Grommet
Fuse (20 A) × 2
Speaker terminal
See the "Connecting the
Speakers and Input wires"
section for speaker connec-
tion instructions.
Fuse (30 A)
Special red battery wire [RD-223] (sold separately)
After making all other connections at the amplifier,
connect the battery wire terminal of the amplifier to
the positive (+) terminal of the battery.
Fuse (30 A)
Ground wire (Black) [RD-223] (sold separately)
Connect to metal body or chassis.
Connecting wires with RCA pin
plugs (sold separately).
External Output
If only one input plug is used, do not
connect anything to RCA input jack B.
Front side
RCA output jack
Back side
System remote control wire (sold separately)
Connect the male terminal of this wire to the system remote control
terminal of the car stereo (SYSTEM REMOTE CONTROL). The female
terminal can be connected to the auto-antenna relay control terminal. If the
car stereo does not have a system remote control terminal, connect the
male terminal to the power terminal through the ignition switch.
RCA input
Input Select Switch
For two-channel input, slide this switch
to the left. For four-channel input, slide
this switch to the right.
RCA input jack B
RCA input jack A
Connecting wires with RCA pin
plugs (sold separately).
Amplifier with
RCA input jacks
Car stereo with
RCA output jacks
6