Publicité
Les langues disponibles
Les langues disponibles
5. Charging
EN
1. Open the charging port cover.
2. Plug the battery charger into the
charging port.
The scooter is fully charged when the LED on the battery charger changes from red to green.
09
3. After charging, pull the plug
and close the charging port cover
tightly.
WARNING!
Only use the original battery charger to avoid potential damage or fire. Switch off the vehicle or into a certain
·
non-operational mode during charging.
Do not charge when the charging port or power cord is wet. If the battery is damaged or soaked with water , it is
·
forbidden to charge or continue to use the battery
+
≤30%
≈ 30
When the scooter is turned off for about a month with the battery level of the scooter being lower than 30%, the
scooter will enter sleep mode. In this case, the scooter cannot be turned on. To exit the sleep mode, charge the
scooter for about three seconds to activate the battery.
EN
=
10
Publicité
