Publicité
Les langues disponibles
Les langues disponibles
Power Button
EN
Power Button: Press the button
to turn the scooter on, and hold the button
off. When the scooter is on, press once to turn on/off the headlight and tail light, and press twice to change riding
modes.
Note: The scooter will turn off automatically when it enters standby mode for more than 10 minutes. The standby
mode means that the scooter is being charged or not locked when it is on and not running.
07
for 2 to 3 seconds to turn the scooter
4. Assembly
1
Remove the inner holders.
Follow the number order as illustrated to
3
pre-tighten the four screws with the included
Allen key. Make sure the handlebar is
correctly installed and then tighten the screws
thoroughly.
Safety Lock
Quick Release Lever
Erect the vertical stem to a complete upright
2
position, lift up the safety lock and push the
folding wrench inward tightly. Install the
handlebar onto the stem, and make sure to
install the handlebar in the correct direction.
Once the scooter is assembled, take out the
4
scooter and put down the kickstand.
EN
08
Publicité
