Miele PWM 511 Schéma D'installation page 10

en - Installation notes
WiFi/LAN inter-
face
Base
(APWM 037/038)
10
The washing machine is equipped with a WiFi/LAN interface for ex-
changing data.
The data interface provided on the LAN connection complies with
SELV (Safety Extra Low Voltage) in accordance with EN 60950. The
LAN connection uses a RJ45 connector in accordance with EIA/
TIA 568-B.
Connected machines must also comply with SELV.
The washing machine can be installed on a machine base (open or box
base, available as an optional Miele accessory).
Elevating the washing machine gives a better ergonomic working po-
sition when loading or unloading. At the same time it facilitates the
installation of a drain connection.
 The washing machine must be secured to the base immediately
after installation. The base must be secured to the floor.
There is a risk of the washing machine falling off a raised base dur-
ing a spin cycle if it is not secured.