Nordica Termocamino 650 Manuel D'instructions Pour L'installation, L'utilisation Et L'entretien page 21

Masquer les pouces Voir aussi pour Termocamino 650:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

IMPORTANT:
a) In case of water leaking, close the water supply and promptly warn the after sales technical service;
b) The system working pressure must periodically be checked.
c) If not using the boiler for a long period of time, it is recommended that the after sales technical service is
contacted to carry out at least the following operations:
-
close the water taps of both the thermal system and the domestic hot water system;
-
empty the thermal system and the domestic hot water system if there is risk of freezing.
La NORDICA S.p.A. declines any responsibility for damages to things and/or people caused by the
installation. Furthermore it is not responsible of any modified product without authorisation as well as for the
use of non-original spare parts.
Your regular local chimney sweep must be informed about the installation of the appliance so that he can check the
correct connection to the chimney.
Before installing the appliance, carry out the following
checks:
Make sure that the floor can support the weight of
the appliance, and if it is made of flammable
material, provide suitable insulation.
Make sure that there is adequate ventilation (by
means of an air intake, see chapter 7) in the room
where the appliance is to be installed.
Do not install the appliance in rooms containing
collective ventilation ducts, hoods with or without
extractor, type B gas appliances, heat pumps, or
other appliances that, operating at the same time,
can put the room in depression (ref. UNI 10683/98
standard)
Make sure that the flue and the pipes to which the
appliance will be connected are suitable for its
operation.
Always leave minimum 6 cm of air gap on sides
and
rear between the thermo-fireplace and the
walls. (see Picture 3 - Picture 14 - Picture 15)
Using the adjustable feet and a level, make sure
that the appliance is perfectly level to ensure the
correct movement of the door.
We recommend having your local chimney sweep
check both the chimney connection and that there is
sufficient air flow for combustion in the place of
installation.
IMPORTANT: Only after a few days of operation (the time necessary for determining that the appliance is
operating correctly), you can begin to assemble the aesthetic facing. We recommend providing an
inspection door on the counter plate or elsewhere as suitable to provide easy accessibility and visibility of the
safety devices (pressure gauges, valves,..).
The diameter of opening for the connection to the connection of chimney must correspond to the smoke pipe diameter
at least. The opening should have a connection to the wall to put inside the outlet pipe and a rose window.
The Termocamino 650 – 800 model MUST be installed in an OPEN EXPANSION TANK system. The installation with
open expansion tank must be provided with:
1.
OPEN EXPANSION TANK which has a capacity of 10% of total water content of thermo-fireplace and of the
installation. This is installed at the highest point of the system, at least 2 m over the radiator that is at the highest
level.
2.
SAFETY PIPE that connects through the shortest way, without descending or siphoning parts, the delivery of
thermo-fireplace to the upper side of open expansion tank. The minimum diameter of safety pipe is 1" gas.
3.
LOADING PIPE which connects the bottom of open expansion tank with the return pipe of installation. The
minimum diameter must be ¾" gas. All those parts must no have for any reason meditate intercept bodies that
could accidentally exclude them and mut be placed in rooms which are protected from frost. On the contrary, if
they freeze, the boiler body could break or even explode. In case of frost placing it will be right to add a proper
percentage of antifreeze liquid to the water of installation in order to delete the whole problem. In no way there
must be water circulation in the open expansion tank between the safety and loading pipe. This would cause the
water oxygenation and the consequent corrosion of thermo-fireplace and installation in a very short time.
20
Picture 3
Termocamino 650 – 800
6cm
min. 5cm
6098000 – EN

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Termocamino 800

Table des Matières