Publicité
Les langues disponibles
Les langues disponibles
List of pictograms used
Read the instruction manual
Hydraulic Bottle Jack
Introduction
We congratulate you on the purchase of your new
product. You have chosen a high quality product.
Familiarise yourself with the product before using
it for the first time. In addition, please carefully
refer to the operating instructions and the safety
advice below. Only use the product as instructed
and only for the indicated field of application. Keep
these instructions in a safe place. If you pass the
product on to anyone else, please ensure that
you also pass on all the documentation with it.
Proper use
Q
The hydraulic vehicle jack is intended for raising
and lowering motor vehicles. Other uses or mod-
ification of the hydraulic vehicle jack shall be con-
sidered as improper use and may lead to injury
or damage. The manufacturer will not accept lia-
bility for loss or damage arising from improper use.
The product is not intended for commercial use.
Note: Reclose the release valve
use!
Description of parts
Q
Support plate
1
Extension screw
2
Lifting handle socket
3
Safety valve
4
Release valve
5
Lifting handle (for pump mechanism)
6
Rod (for release valve)
7
Oil plug
8
14 GB/IE
ca. / approx. /
env. /
18,5–36 cm
Technical data
Q
Stroke:
Maximum load: 3000 kg
Weight:
Hydraulic oil:
Maximum
force on lever:
Included items
Q
1 Hydraulic bottle jack
1 Lifting handle
1 Rod for release valve
1 Operating instructions
DANGER! Follow the instructions below to
avoid the threat of loss of life, injury, or dam-
age to the product etc.
Always use axle stands and wheel chocks
in addition to your hydraulic vehicle jack.
Never work under a raised vehicle unless
after each
you have taken additional safety precautions.
5
This is intended to prevent the vehicle from
rolling away, sliding off or overturning the jack.
Use the product on a solid, level surface
only. Using the product on an unstable or
uneven surface – such as a gravel surface
– may lead to the load slipping.
The person operating the jack must observe
the jack and the load during all movements.
Never work under the raised load if it has
not been made secure by suitable means.
Lifting height
approx. 18.5–36 cm
approx. 3.0 kg
Complies with ISO VG 15
350 N*
Safety notes
Ensure that you never exceed the
allowable (rated) load capacity.
3000
kg
Publicité
