CRAFT+MAIN JETCOAT REFLECTIONS RFL603696-SSS Instructions De Montage page 6

INSTALLATION INSTRUCTIONS / STEP 1 - HOW TO MEASURE
STEP 1: HOW TO MEASURE
1a. Measure the height of installation
area at both ends of each wall.
From top of the shower pan to the
ceiling. If the ceiling height is less
than the height of the panels
included in your kit, the panels can
be cut down using the cutting
procedure outlined in Step 2.
Measure width of each wall at top
and bottom of installation area.
1b. Measure cut-out locations for
plumbing fixtures and mark them on
the back of the appropriate panel(s).
1a
1b
6