Publicité
Les langues disponibles
Les langues disponibles
LEFT SIDE ACCENT PANEL INSTALLATION INSTRUCTIONS / STEP 17
INSTALLATION FOR MODEL#
RFL603696-SSS / RFL603696-CSS
STEP 17.1: INSTALL RIGHT SIDE
ACCENT PANEL (C) SUBWAY
17.1a. Locate Panel (C) Right Side Accent
Panel and lay it down on a flat surface.
17.1b. Based on your measurements from
Step 1 (How to Measure), make any
required plumbing cut-outs according to
the instructions in Step 2 (How to Cut).
Note: If you are not using the full
width of the left side panels, cut
the left/inside end of the panels as
the back corner will be caulked later
in the installation and any flaws in the
cut can be hidden in the process.
(Do not cut off the interlocking
feature, adjust width only).
17.1c. Repeat Steps 4c. - 4e.
INSTALLATION FOR MODEL#
RFL603696-SMH (HEXAGON ACCENT)
STEP 17.2: INSTALL RIGHT SIDE ACCENT PANEL (C) HEXAGON
NOTE: Your kit includes: (1) 60" Hexagon Back Accent Panel and (2) 42" Hexagon Side Panels -
Additional panel length to allow for trim adjustments. Hexagon Accent Panel (A), Panel (B), and
Panel (C) install in a continuous horizontal pattern.
17.2 EXAMPLE
CENTER BACK
Accent Panel (A)
17.2a. Locate Panel (C) Right Side Accent Panel and lay it down on a flat surface.
17.2b. Based on your measurements from Step 1 (How to Measure), trim any necessary
adjustments from the Left/Inside edge of Panel (C). The amount trimmed will mirror
the Hexagon pattern on Center Back Panel (A).
(Do not cut off the interlocking feature, adjust width only).
17.2c. Repeat Steps 4c. - 4e.
17.1
CUT
CUT
17
RIGHT SIDE
Accent Panel (C)
42"
C
Publicité
